Serving Edmond, OK & surrounding communities · 24/7 emergency response 1445 S Santa Fe Ave, Edmond, OK 73003 · (405) 872-2217
Emergency Response

What to Do in the First 24 Hours After a Sewage Backup

Published 2026-01-12 · 7 min read · By the Edmond Sewage & Water Restoration Team

The first day after a sewer line backs up sets the tone for how much of your home ends up affected. What you do — and don't do — in those first hours can be the difference between a contained, single-room cleanup and a multi-room restoration project. Here's a practical walkthrough of the first 24 hours, written for homeowners dealing with an active or recent sewage backup in the Edmond area.

Step 1: Stop Using Water in the Building

The single most useful thing you can do immediately is stop adding water to the plumbing system. Every flush, load of laundry, or dishwasher cycle adds volume to a system that's already struggling to drain, which can push more contaminated water back into your home instead of out to the street. Ask everyone in the household to hold off on showers, laundry, and dishwashing until the backup is resolved.

Step 2: Keep People and Pets Away From the Area

Sewage backup water is classified as Category 3 contaminated water, meaning it can carry bacteria, viruses, and other pathogens. Close off the affected room if possible, and keep children, pets, and anyone with a compromised immune system away from the area until it has been professionally extracted and treated.

Step 3: Turn Off Electricity to the Affected Area If It's Safe to Do So

If contaminated water has reached outlets, appliances, or an electrical panel, and you can safely access your breaker panel without stepping into standing water, shut off power to that area. If reaching the panel means walking through contaminated water, don't attempt it — wait for a professional or an electrician instead.

Step 4: Document the Damage Before Anything Is Touched

Photos and video of the affected area, taken before cleanup begins, are useful for insurance purposes and for tracking the extent of the damage. Capture wide shots of each affected room as well as close-ups of specific damage to flooring, walls, and belongings.

Step 5: Call for Professional Extraction

Because sewage backup water is contaminated, this isn't a job for a household wet-dry vacuum or a stack of towels. A professional response includes contained extraction, removal of any material that can't be safely sanitized, and antimicrobial treatment of the affected structure. The sooner extraction starts, the less contamination has a chance to spread into materials that were originally untouched.

What Not to Do

Avoid walking through standing sewage water without protective gear, don't run a household vacuum not rated for contaminated water, and resist the urge to start pulling up carpet or drywall yourself — contaminated material needs to be bagged and disposed of properly, not left in a pile inside the house. Don't run fans indiscriminately either, since that can spread contaminated aerosols to unaffected rooms rather than just drying the area.

Frequently Asked Questions

Can I use towels and a mop to clean up a small sewage spill myself?

A very small, contained spill on a hard, non-porous surface can sometimes be managed with gloves, a mask, and a disinfectant labeled for contaminated water. Anything larger, or anything that has touched carpet, drywall, or subfloor, should be handled professionally.

How soon should professional cleanup start after a backup?

As soon as possible. Contaminated water spreads into porous materials through capillary action, and the risk of secondary damage, including mold, increases the longer materials stay wet.

Have an active sewage backup?

Call now for 24/7 emergency response across Edmond, OK.