Of all the preventive measures available to homeowners, a backflow (or backwater) valve is one of the most direct ways to stop a municipal sewer backup from reaching the inside of a home. Edmond's own guidance on sewer backups points to this valve as the best protection against backups originating from the public system, which makes it worth understanding in some detail.
How a Backflow Valve Works
A backflow valve sits inside the sewer line, typically installed in a homeowner-accessible location, and contains a flap or gate mechanism that allows wastewater to flow out of the home toward the municipal main under normal conditions. If water pressure reverses — as happens during a municipal line surcharge — the valve closes, physically blocking sewage from flowing backward into the home.
Why Edmond Requires Them on New and Repaired Lines
According to city guidance, backwater valves are required by ordinance on all new and newly repaired sewer lines in Edmond. This reflects a broader industry recognition that backwater valves are one of the most effective, lowest-maintenance tools available for protecting individual properties from a citywide or neighborhood-level sewer system issue that's largely outside any one homeowner's control.
What Homes Without One Should Consider
Older homes with original, unmodified sewer lines may not have a backwater valve installed, since the requirement applies specifically to new and newly repaired lines. Homeowners in this situation, particularly those in lower-lying areas or homes with a basement floor drain, can talk with a licensed plumber about retrofitting a valve onto an existing line.
A Valve Doesn't Eliminate Every Risk
A backwater valve protects specifically against backups originating from the municipal system flowing backward into a home. It doesn't prevent a blockage inside the home's own lateral line — from tree roots, grease buildup, or a broken pipe between the house and the valve — from causing a backup on its own. Combining a functioning valve with regular line maintenance offers more complete protection than either measure alone.
Frequently Asked Questions
Can I install a backwater valve myself?
Backwater valve installation involves cutting into the sewer line and requires an understanding of local plumbing code, so it's typically a job for a licensed plumber rather than a DIY project.
Does a backwater valve need maintenance?
Backwater valves generally require periodic inspection to confirm the flap mechanism is moving freely and hasn't become stuck open or closed by debris. A plumber can check this as part of routine plumbing maintenance.